Ceiling Fans USE AND CARE GUIDE
Important Safety Instructions WARNING: To avoid fire, shock and serious personal injury, follow these instructions. 1. Read your owner's manual and safety information before installing your new fan. Review the accompanying assembly diagrams. 2. Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally.
ONE YEAR WARRANTY If the fan motor or any other part fails at any time within one years of the original purchase, due to a defect in materials or workmanship, we will repair or replace, at our option, the defective part, free of charge. Because of varying climate conditions, this warranty does not cover changes on the finish, including rusting, pitting, corroding, tarnishing or peeling. This includes coastal locations where salt air can cause corrosion.
Unpacking Instructions Check to see that you have received the following parts: 3
Energy Efficient Use of Ceiling Fans Ceiling fan performance and energy savings rely heavily on the proper installation and use of the ceiling fan. Here are a few tips to ensure efficient product performance. Choosing the Appropriate Mounting Location Ceiling fans should be installed, or mounted, in the middle of the room and at least 10 feet from floor to the blade and 18 inches from wall to the blade. Turn Off When Not in the Room Ceiling fans cool people, not rooms.
Deep-profile use(Figure 2) A 2-1-in.-deep box can be attached to blocking between joists and is roomly enough to handle more than one cable. WARNING: To reduce the risk of fire, electrical shock, or personal injury, mount fan to outlet box marked acceptable for fan support of 45 kg (99.12lbs) or less. Use screws supplied with outlet box. Most outlet boxes commonly used for support of light fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electrician if in doubt.
How to Assemble Your Ceiling Fan 1. After installing the black receiver, put the receiver inside the motor. WARNING: To avoid possible fire or shock, be sure electricity is turned off at the main fuse box before hanging. 2. Intstall the motor to the ceiling, and then tighten the four scres.
3. Attach blades to motor by using screws provided in hareware bad.(Repeat step until all 3 blades are installed.) a. Fix the fan blades to the motor. b. Fix the LED Lights to the Lights kit pan. (The LED kit pan is magnetic) c. Connect the wire of the LED to the motor. d. Fasten the lamp panel to the motor with screws. 4.Tighten the lamp cover to the lamp holder.
How to Operate Your Ceiling Fan 1. Restore electrical power to the outlet box by turning the electricity on at the main fuse box. WARNING: Check to see that all connections are tight, including ground, and that no bare wire is visible at the wire connectors, except for the ground wire. Do not operate fan until the blades are in place. Noise and fan damage could result. WARNING: Do not operate this fan with a variable (Rheostat) wall controller or dimmer switch.
How to Install Your Remote Control Installing Wall Holder: Attach wall holder using the two provided screws. Maintenance 1. Periodic cleaning of your new ceiling fan is the only maintenance that is needed. When cleaning, use only a soft brush or lint free cloth to avoid scratching the finish. Abrasive cleaning agents are not required and should be avoided to prevent damage to finish. CAUTION: Do not use water when cleaning your ceiling fan.
How TO Use the Mobile APP 1. Scan the barcode and download the FANLAMPPRO APP. (Andriod could download from GOOGLE PLAY STORE) 2. Choose the Language and Manage room information. 3. Add a new fan. 4. Choose a name for a new fan and select the room where it is located. 5. In case, it isn't located in one of the predetermined locations, select the Personalize option and add a new room.
8. Enter room and Click the Fan control interface. 7. Enter the main control interface, turn on the Bluetooth from smart phone, turn off the electric power supply, and then turn on the electric power supply again, the LED of the ceiling fan is bright and the Bluetooth of device is ready for connecting to smart phone. Finally, click the Pairing Button in APP within 5 seconds of power. If the pairing button is green, the ceiling fan has been connected with smart phone. APP can control the ceiling fan now.
Troubleshooting Warning: For your own safety turn off power at fuse box or circuit breaker before trouble shooting your fan. TROUBLE Probable Cause Suggested Remedy FAN WILL NOT START 1.Fuse or circuit breaker blown. 2.Loose power line connections to the fan, or loose switch wire connections in the switch housing. 3.Reversing switch in neutral position. 4. Dead battery in remote control. 1.Check main and branch circuit fuses or circuit breakers. 2.
