Instructions / Assembly
Table Of Contents
- USE AND CARE GUIDE
- Important Safety Instructions
- Additional Safety Instructions
- Unpacking Instructions
- Energy Efficient Use of Ceiling Fans
- Electrical and Structural Requirements
- How to Assemble Your Ceiling Fan
- How to Operate Your Ceiling Fan
- How to Install Your Remote Control
- Maintenance
- How TO Use the Mobile APP
- Troubleshooting
1
Important Safety Instructions
WARNING: To avoid fire, shock and serious personal injury, follow these instructions.
1. Read your owner's manual and safety information before installing your new fan. Review
the accompanying assembly diagrams.
2. Before servicing or cleaning unit, switch power off at service panel and lock service panel
disconnecting means to prevent power from being switched on accidentally. When the service
disconnecting means cannot be locked, securely fasten a warning device, such as a tag, to the
service panel.
3. Be careful of the fan and blades when cleaning, painting, or working near the fan. Always
turn off the power to the ceiling fan before servicing.
4. Do not insert anything into the fan blades while the fan is operating.
5. The appliance is not intended for use by young children or infirm persons without
supervision. Young children should be supervised to ensure that they do not play with the
appliance.
Additional Safety Instructions
1. To avoid possible shock, be sure electricity is turned off at the fuse box before wiring, and
do not operate fan without blades.
2. The ceiling fan must be grounded as a precaution against possible electrical shock.
Electrical installation should be made or approved by a licensed electrician.
3. The fan base must be securely mounted and capable of reliably supporting at least 50 lbs
(fan and accessories not to exceed 99.12 lbs or 45 kgs). Consult a qualified electrician if in
doubt.
4. The fan must be mounted with the fan blades at least 10 feet from the floor to prevent
accidental contact with the ceiling fan.
5. Follow the recommended instructions for the proper method of wiring your ceiling fan. If
you do not have adequate electrical knowledge or experience, have your fan installed by
licensed electrician.
6. This fan is to be used in indoor dry or damp location only.
WARNING: This product is designed to use only those parts supplied with this product
and/or accessories designated specifically for use with this product. Using parts and/or
accessories not designated for use with this product could result in personal injury or property
damage.
WARNING: To reduce the risk of personal injury, do not bend the blade bracket (flange or
blade holder) when installing the brackets, balancing the blades, or cleaning the fan. Do not
insert foreign objects in between rotating fan blades.