Instructions / Assembly

4
Energy Efficient Use of Ceiling Fans
Ceiling fan performance and energy savings rely heavily on the proper installation and
use of the ceiling fan. Here are a few tips to ensure efficient product performance.
Choosing the Appropriate Mounting Location
Ceiling fans should be installed, or mounted, in the middle of the room and at least 10 feet from
floor to the blade and 18 inches from wall to the blade.
Turn Off When Not in the Room
Ceiling fans cool people, not rooms. If the room is unoccupied, turn off the ceiling fan to save
energy.
Using the Ceiling Fan Year Round
Summer Season: Use the ceiling fan in the clockwise direction. The airflow produced by the
ceiling fan creates a wind-chill effect, making you feel cooler. Select a fan speed that provides a
comfortable breeze, lower speeds consume less energy.
Winter Season: Reverse the motor and operate the ceiling fan at low speed in the
counterclockwise direction. This produces a gentle updraft, which forces warm air near the ceiling
down into the occupied space. Remember to adjust your thermostat when using your ceiling
fan-additional energy and dollar savings could be realized with this simple step!
Electrical and Structural Requirements
Your new ceiling fan will require a grounded electrical supply line of 120 volts AC, 60 HZ, 15
Amp Circuit. Electrical code requires use of a fan-rated outlet box to support the extra weight and
motion associated with a ceiling fan. A fan-rated box will be labeled as such and typically supports
up to a 70lbs ceiling fan. Fan-Rated Outlet Boxes vary in ratings and design. Ensure the ratings of
your ceiling fan outlet box meet the requirements for the ceiling fan being installed. Figure 1,
Figure 2 and Figure 3 depicts different structural configurations that may be used for mounting the
outlet box.
Low-profile use (Figure 1)
A 1 2-in.-deep pancake box is meant to be
screwed to a joist or block. It's used if only
one cable is coming into the box. It is also
available in a saddle-mount configuration.