Instructions / Assembly
Table Of Contents
- USE AND CARE GUIDE
- Important Safety Instructions
- Additional Safety Instructions
- Unpacking Instructions
- Energy Efficient Use of Ceiling Fans
- Electrical and Structural Requirements
- How to Assemble Your Ceiling Fan
- How to Operate Your Ceiling Fan
- How to Install Your Remote Control
- Maintenance
- How TO Use the Mobile APP
- Troubleshooting
8
How to Operate Your Ceiling Fan
1. Restore electrical power to the outlet box by turning the electricity on at the main fuse box.
2. To make fan operational, install two 1.5V AAA battery (not included) in hand-held remote
transmitter, with fan power off. (If not used for long periods of time, remove battery to prevent
damage to transmitter). Store the remote away from excessive heat or humidly.
3. Remote Control Functions:
WARNING: Check to see that all connections are tight, including ground, and that no bare
wire is visible at the wire connectors, except for the ground wire. Do not operate fan until the
blades are in place. Noise and fan damage could result.
WARNING: Do not operate this fan with a variable (Rheostat) wall controller or dimmer
switch. Doing so could result in damage to the ceiling fan's remote control unit.