Instructions / Assembly

4
\
Before:
1. Install the Remote OR Wall Switch, DO
NOT install both of them.
2. Check circuit fuses or breakers and make sure the battery is installed correctly.
3. Check line wire connections to the fan and switch wire connections in the switch
5.
CAUTION: Make sure the main power is off.
Problem: Light does not work
1. Check to see that the wire connections in theswitch housing are connected.
2. Make wiring connections from the house to the LED light directly (don't connect
the remote and the fan) to determine it's the issue of the LED light or not.
Problem: Fan will not start.
1. Check line wire connections to the fan and switch wire connections in the switch
housing. CAUTION: Make sure the main power is off.
2. Make the Fan wiring connections Without the Remote & transmitter and the light,
to determine it's the issue of the fan body or not.
a) Please don't wire the light at the bottom
b) Connect the Ceiling Fan Neutral Wire (White) to the Neutral
Wire (White) coming through the ceiling
Connect the Ceiling Fan Live Wire (Black) to the Live wire (Black or Colored) coming through the ceiling
Then turn on the main power, check the fan works separately or not.
Link the lamp body and the driver to the plug-in wire according to the corresponding
Color Live Neutral at Link Drive to Power Wire (Attached Wiring Diagram)
4. Twist the lampshade counterclockwise into the disc and fix it to complete the installation housing.
DC motor ControL Driver
ModeL:XH-0SFS-24V-84 433
Input:AC110-265V 50/60HZ
LED OUT:50-200W 220816 C