User's Manual

17
Chapter 4
PIN Method
Other devices can connect to this AP device by WPS with the AP device’s PIN and the AP
device can connect to other devices by entering their PINs. The PIN method can only be
applied in Access Point and Multi-SSID modes.
Follow the steps below to use WPS by PIN method.
1. Visit http://tplinkap.net, then log in with the username and password you set for the
AP device.
2. Go to Advanced > Wireless > WPS. There are also two ways to use WPS PIN method:
using the AP device’s PIN and using the wireless client’s PIN.
¾ Using the AP Device‘s PIN
1 ) Toggle On Enable Device’s PIN to allow wireless clients to connect to the device
using the Device’s PIN.