User's Manual
Table Of Contents
- About This Guide
- Get to Know About Your Router
- Connect the Hardware
- Log into Your Router
- Set Up Internet Connection
- Guest Network
- USB Application
- Parental Controls
- QoS
- Network Security
- NAT Forwarding
- VPN Server
- Customize Your Network Settings
- Manage the Router
- 13. 1. Set Up System Time
- 13. 2. Test the Network Connectivity
- 13. 3. Upgrade the Firmware
- 13. 4. Backup and Restore Configuration Settings
- 13. 5. Change the Administrator Account
- 13. 6. Password Recovery
- 13. 7. Local Management
- 13. 8. Remote Management
- 13. 9. System Log
- 13. 10. Monitor the Internet Traffic Statistics
- 13. 11. Control LEDs
- FAQ
4
Chapter 1
Get to Know About Your Router
LED Explanation
Name Status Indication
(2.4GHz Wireless)
On The 2.4GHz wireless band is working properly.
Off The 2.4GHz wireless band is disabled.
(5GHz Wireless)
On The 5GHz wireless band is working properly.
Off The 5GHz wireless band is disabled.
(Ethernet 1-4)
On At least one Ethernet port is connected.
Off No Ethernet port is connected.
(Internet)
Green On Internet is available.
Orange On
The router’s Internet port is connected, but the Internet
is not available.
Off The router’s Internet port is not connected.
(WPS)
On/Off
Turns on when a WPS connection is established, and goes off about
5 minutes later.
Flashing
A wireless device is trying to connect to the network via WPS. This
process may take up to 2 minutes.
(USB)
On A USB device is connected to the corresponding USB port.
Flashing A USB device is connecting to the corresponding USB port.
Off No USB device is the corresponding USB port.
1. 2. 2. The Back Panel
The following parts (view from left to right) are located on the rear panel.