User's Manual
Table Of Contents
- Chapter 1. Get to Know About Your Router
- Chapter 2. Connect the Hardware
- Chapter 3. Log into Your Router
- Chapter 4. Set Up Internet Connection
- Chapter 5. Guest Network
- Chapter 6. USB Application
- Chapter 7. Parental Controls
- Chapter 8. Security
- Chapter 9. NAT Forwarding
- Chapter 10. QoS
- Chapter 11. Specify the Network Settings
- 4. Enter the username, password and domain name of the account (such as lisadns.ddns.net).
- 5. Click Login and Save.
- 1. Change the routers LAN IP addresses to two different IP addresses on the same subnet. Disable Router 2’s DHCP function.
- 2. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. Go to Network →Advanced Routing. Click Add to add a new static routing entry.
- Chapter 12. Administrate Your Network
- Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
- Go to Advanced > System Tools > Administration. In Remote Management section, finish the settings according to your needs.
- Appendix A: Specifications
- Appendix B: Troubleshooting Guide & FAQ
- Appendix C: Configure the PC
Option 2: Wirelessly
Connect wirelessly by using the SSID (Network Name) and Wireless Password/PIN printed on the product label at
the bottom of the router.
Option 3: Use the WPS button
If your computer or wireless adapter has a physical WPS button, you can use the WPS button to quickly connect
the router.
1) Press the WPS button on the router for 1 seconds.
2) Within 2 minutes, press the WPS button on your adapter for 2 seconds.
3) The WPS LED flashes for two minutes during the WPS process.
4) When the WPS LED is on, the client device has successfully connected to the router.
Chapter 2 Connect 11