User's Manual
Table Of Contents
- Chapter 1. Get to Know About Your Router
- Chapter 2. Connect the Hardware
- Chapter 3. Log into Your Router
- Chapter 4. Set Up Internet Connection
- Chapter 5. Guest Network
- Chapter 6. USB Application
- Chapter 7. Parental Controls
- Chapter 8. Security
- Chapter 9. NAT Forwarding
- Chapter 10. QoS
- Chapter 11. Specify the Network Settings
- 4. Enter the username, password and domain name of the account (such as lisadns.ddns.net).
- 5. Click Login and Save.
- 1. Change the routers LAN IP addresses to two different IP addresses on the same subnet. Disable Router 2’s DHCP function.
- 2. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. Go to Network →Advanced Routing. Click Add to add a new static routing entry.
- Chapter 12. Administrate Your Network
- Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
- Go to Advanced > System Tools > Administration. In Remote Management section, finish the settings according to your needs.
- Appendix A: Specifications
- Appendix B: Troubleshooting Guide & FAQ
- Appendix C: Configure the PC
Completed!
System log is saved successfully. Now you can send it to the technical support for troubleshooting.
To Send the System Log at a Fixed Time:
For example: I want to check my router’s working status at a fixed time every day. However, it’s too much
trouble to login to the web interface every time I want to go checking. It would be great if the system log
could be sent to my mailbox at 8am every day.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Click Advanced > System Tools > System Log to enter the configuration page.
3. Click Mail Settings.
4. Fill in the information with the help of page tips:
1) From: input the email address used to send the system log;
2) To: enter the recipient’s email address, which can be the same to or different
Chapter 12 Administrate Your Network73