User's Manual
Table Of Contents
- Chapter 1. Get to Know About Your Router
- Chapter 2. Connect the Hardware
- Chapter 3. Log into Your Router
- Chapter 4. Set Up Internet Connection
- Chapter 5. Guest Network
- Chapter 6. USB Application
- Chapter 7. Parental Controls
- Chapter 8. Security
- Chapter 9. NAT Forwarding
- Chapter 10. QoS
- Chapter 11. Specify the Network Settings
- 4. Enter the username, password and domain name of the account (such as lisadns.ddns.net).
- 5. Click Login and Save.
- 1. Change the routers LAN IP addresses to two different IP addresses on the same subnet. Disable Router 2’s DHCP function.
- 2. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. Go to Network →Advanced Routing. Click Add to add a new static routing entry.
- Chapter 12. Administrate Your Network
- Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
- Go to Advanced > System Tools > Administration. In Remote Management section, finish the settings according to your needs.
- Appendix A: Specifications
- Appendix B: Troubleshooting Guide & FAQ
- Appendix C: Configure the PC
from the sender’s email address;
3) SMTP Server: enter the SMTP server address;
Tip: SMTP server is available for users in most webmail systems. For example,
the SMTP server address of Hotmail is smtp-mail.outlook.com. You can refer to
their Help page to learn the SMTP server address.
4) Select Enable Authentication;
Tip: Generally speaking, Enable Authentication should be selected if the login
of the mailbox requires username and password. If authentication is enabled,
you are required to enter Username and Password.
5) Enter Username: the email address used to send the system log.
6) Enter Password: the password to login the sender’s email address.
7) Select Enable Auto Mail;
Tip: The router will send the system log to the designated email address if this
option is enabled.
8) Set a fixed time. The recipient will receive the system log sent at this time every
day.
5. Click Save.
Completed!
Chapter 12 Administrate Your Network74