User's Manual

Table Of Contents
5
Chapter 1
Get to Know About You Router
1. 2. 2. The Back Panel
The following parts (view from left to right) are located on the rear panel.
Item Description
Ethernet Ports (1/2/3/4) For connecting your PCs or other wired network devices to the router.
Internet Port For connecting to a DSL/Cable modem, or an Ethernet port.
Wi-Fi/WPS
To turn on/off the Wi-Fi function by pressing until the 2.4Ghz LED and 5Ghz LED
on/off.
To enable the WPS function, press this button about 2 seconds. If you have a WPS-
supported device, you can press this button to quickly establish a connection
between the router and the client device and automatically configure wireless
security for your wireless network.
Reset Hole
Use a pin to press and hold this button until the Power LED starts blinking to reset
the router to its factory default settings.
Power On/Off Button Press this button to power on or off the router.
Power Port For connecting the router to power socket via the provided power adapter.
Antennas
Used for wireless operation and data transmit. Upright them for the best Wi-Fi
performance.