User's Manual

4 ) Go to Advanced > Restore advanced settings, and click OK to save the settings.

• Use another web browser or computer to log in again.

• Reset the router to factory default settings and try again. If the login still fails, please

contact the technical support.

Note: You’ll need to reconfigure the router to surf the internet once the router is reset.

Q4. How do I use the WDS Bridging function to extend my wireless

network?

For example, my house covers a large area. The wireless coverage of the router I’m

using (the root router) is limited. I want to use an extended router to extend the wireless

network of the root router.

Note: WDS bridging only requires configuration on the extended router.

1. Visit http://tplinkwifi.net, and log in to with the username and password you set for

the router.

2. Configure the IP address of the router:

1 ) Go to Network > LAN, configure the IP address of the extended router to be

in the same subnet with the root router; (For example, the IP address of the

root router is 192.168.0.1, the IP address of the extended router can be

192.168.0.2~192.168.0.254. We take 192.168.0.2 as example.)