User's Manual

Chapter 4 Congure the Router

5. Delete all or disable all entries if there are any entries already.

6. Click Add New and fill in the blank.

1 ) Enter the MAC address 00-0A-EB-B0-00-0B/00-0A-EB-

00-07-5F in the MAC Address field.

2 ) Enter wireless client A/B in the Description field.

3 ) Select Enabled in the Status drop-down list.

4 ) Click Save and click Back.

7. The configured filtering rules should be listed as the picture

shows below.

Now only client A and client B can access your network.

4. 4. 5. Wireless Advanced

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the

router.

2. Go to Wireless > Wireless Advanced.

3. Configure the advanced settings of your wireless network and click Save.

Note:

If you are not familiar with the setting items on this page, it’s strongly recommended to keep the provided default values;

otherwise it may result in lower wireless network performance.

Done!