User's Manual Part 1

6
Chapter 1 Get to Know About Your Router
LED Explanation
Name Status Indication
(WPS)
On
A wireless device has been successfully added to the network by
WPS function.
Flashing
WPS handshaking is in process and will continue for about 2 minutes.
Please press the WPS button on other wireless devices that you want
to add to the network while the LED is flashing.
Off
The router is not in the WPS process.
(USB1)
On The USB 3.0 device is identified and ready to use.
Flashing The USB 3.0 device is being identified.
Off
No USB 3.0 device is plugged into the USB port or the USB device is
not identified or USB device has been safely ejected.
(USB2)
On The USB 2.0 device is identified and ready to use.
Flashing The USB 2.0 device is being identified.
Off
No USB 2.0 device is plugged into the USB port or the USB device is
not identified or USB device has been safely ejected.
Note:
After a device is successfully added to the network by WPS function, the WPS LED will keep on for about 5 minutes
and then turn off.
1. 3. 2. The Back Panel
The router’s back panel shows the connection ports, buttons and antennas (view from
left to right). Refer to the following for detailed instructions.
Item Description
Internet This port is where you will connect the DSL/cable Modem, or Ethernet.
LAN1, LAN2, LAN3,
LAN4
These ports (1, 2, 3, 4) connect the router to the local PC(s).
Power For connecting the router to power socket via the provided power adapter.