User's Manual Part 2

72
Chapter 12 Customize Your Network Settings
For example, I already bought IPTV service, but this service can
only be delivered through the Internet. Therefore, I need to
configure my router first.
1. Visit http://tplinkwifi.net, and log in with the username and
password you set for the router.
2. Go to Advanced > Network > IPTV to open the configuration
page.
3. Configure IPTV settings:
1 ) Select the Enable IPTV check box.
2 ) Select the appropriate Mode according to your ISP. Select
Bridge if your ISP is not listed and no other parameters
are required, and then skip to substep 4. Select Custom if
your ISP is not listed but provides necessary parameters.
3 ) After you have selected a mode, the necessary parameters
are predetermined. You can perform other configuration,
e.g. enter the IPTV Multicast VLAN ID and select the IPTV
Multicast VLAN Priority in Russia mode according to your
ISP.
4 ) Select the IGMP Proxy version, either V2 or V3, according
to the information provided by your ISP.
5 ) For Russia, Singapore-ExStream, Malaysia-Unifi and Malaysia-Maxis mode,
connect device to the predetermined LAN port. For Bridge and Custom
mode, select a LAN port as the IPTV port and connect the set-top box to the
corresponding port.
6 ) Click Save.
Your IPTV setup is done now! You may need other configurations
on your set-top box before enjoying your TV.
How can I
do that?
Done!