User's Manual

Chapter 1

Get to Know Your Router

Notes:

1. After a device is successfully added to the network by WPS function, the WPS LED will keep on for about 5 minutes

and then turn off.

2. You can turn the LEDs on or off by pressing the LED On/Off

button.

1. 3. 2. Back Panel

The router’s back panel shows the connection ports, buttons and antennas (view from

left to right). Refer to the following for detailed instructions.

Item Description

Internet

This port is where you will connect the DSL/cable Modem, or Ethernet.

LAN1, LAN2, LAN3,

LAN4

These ports (1, 2, 3, 4) connect the router to the local PC(s).

Power

For connecting the router to power socket via the provided power adapter.

Power On/Off

The switch for the power. Press it to power on or off the router.

Antennas

Used for wireless operation and data transmit. Upright them for the best Wi-Fi

performance.

1. 3. 3. Side Panel