User's Manual

8
Chapter 1 Get to Know Your Router
The router’s side panel shows the USB ports and buttons (view from left to right). Refer
to the following for detailed instructions.
Item Description
WiFi On/Off
For turning on/off the WiFi function.
Reset
The switch for the reset function. There are two ways to reset the router’s
factory defaults.
Method one: With the router powered on, press and hold the Reset button
for at least 5 seconds until all LEDs light on (wireless LEDs may not light on if
the WiFi on/off button is off). And then release the button and wait the router
to reboot to its factory default settings.
Method two: Restore the default setting from Backup and Restore
Configuration Settings
of the router’s web management page.
WPS
The switch for the WPS function. Pressing this button for less than 5
seconds enables the WPS function. If your client devices, such as wireless
adapters, that support Wi-Fi Protected Setup, then you can press this button
to quickly establish a connection between the router and client devices and
automatically configure wireless security for your wireless network.
USB 2.0
For connecting to a 2.0 USB storage device or a 2.0 USB printer.
USB 3.0
For connecting to a 3.0 USB storage device or a 3.0 USB printer. It is also
compatible with USB 2.0 devices.