User's Manual

11
Chapter 2 Connect the Hardware
6. Verify that the following LEDs are on and solid before continuing with the
configuration.
Note:
If the 2.4GHz LED
and 5GHz LED are off, please press the Wi-Fi On/Off button on the side panel for 2
seconds and check the LEDs again in a few seconds later.
Tips:
For optimum performance, orient the four antennas as shown in the drawing below.
30° 30°
7. Connect your computer to the router.
• Method 1: Wired
Turn off the Wi-Fi on your computer and connect the devices as shown below.
Ethernet Cable
• Method 2: Wirelessly
The default wireless network names (SSIDs) and password are printed on the Wi-Fi Info
Card included in the package.
• Method 3: Use the WPS button
Power
On
On
Internet
5GHz
On
2.4GHz
On