User's Manual

16
Chapter 4 Set Up Internet Connection
4. 1. Quick Setup
The Quick Setup Wizard will guide you through the process to set up your router.
Tips:
If you need the IPv6 internet connection, please refer to the section of Set Up an IPv6 Internet Connection.
Follow the steps below to set up your router.
1. Visit
http://tplinkwifi.net, and log in with the account you set for the router.
2. Click
Quick Setup on the top of the page. Then follow the step-by-step instructions
to connect your router to the internet.
3. To enjoy a more complete service from TP-Link (remote management, TP-Link DDNS,
etc.), log in with your TP-Link ID or click
Resigter Now to get one. Then follow the
instructions to bind the cloud router to your TP-Link ID.
Note:
• To learn more about the TP-Link Cloud service, please refer to the TP-Link Cloud Service section.
• If you do not want to register a TP-Link ID for now, you may click Log In Later to proceed.
• If you have changed the preset wireless network name (SSID) and wireless password during the Quick
Setup process, all your wireless devices must use the new SSID and password to connect to the router.
4. 2. Manually Set Up Your Internet Connection
In this part, you can check your current internet connection settings. You can also
change the settings according to the service information provided by your ISP.
Follow the steps below to check or change your internet connection settings.
1. Visit
http://tplinkwifi.net, and log in with the account you set for the router.
2. Go to
Basic > Internet.
3. Select your internet connection type from the drop-down list.