User's Manual

Chapter 4

Set Up Internet Connection

Tips:

1. If you use Dynamic IP and PPPoE and you are provided with any other parameters that are not required on the page,

please go to Advanced > Network > Internet to complete the configuration.

2. If you still cannot connect to the internet, refer to FAQ for further instructions.

4. 3. Set Up an IPv6 Internet Connection

Your ISP provides information about one of the following Internet connection types:

PPPoE, Dynamic IP(SLAAC/DHCPv6), Static IP, 6to4 tunnel, Pass-Through (Bridge).

1. Visit

http://tplinkwifi.net, then log in with the account you set for the router.

2. Go to

Advanced > IPv6.