User's Manual

Chapter 4

Set Up Internet Connection

Tips:

Visit FAQ if there is no internet connection.

4. 4. Configure the Router in Access Point Mode

In this mode, your router connects to a wired or wireless router via an Ethernet cable

and extends the wireless coverage of your existing network. Functions like NAT, Parental

Controls and QoS are not supported in this mode.

Router

1. Connect one of the router’s LAN ports to the existing network using an Ethernet

cable.

2. Visit

http://tplinkwifi.net, and log in with the account you set for the router.

3. Go to

Advanced > Operation Mode, select Access Point and click Save. Log in after

the router reboots.

4. Go to

Advanced > Wireless > Wireless Settings and set the SSIDs and passwords for

the wireless network.

Now, you can connect to the SSIDs and enjoy your existing network.