User's Manual

61
Chapter 10 Network Security
The level of protection is based on the number of traffic packets. The protection will be triggered immediately
when the number of packets exceeds the preset threshold value (the value can be set on Advanced > System
Tools > System Parameters > DoS Protection Settings), and the vicious host will be displayed in the Blocked DoS
Host List.
5. If you want to ignore the ping packets from the WAN port, select Forbid Wan Ping;
if you want to ignore the ping packets form the LAN port, select
Forbid Lan Ping.
6. Click
Save to make the settings effective.
10. 2. Access Control
Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed
devices (Whitelist).
Block or allow specific client devices to access my network (via
wired or wireless).
1. Visit
http://tplinkwifi.net, and log in with the account you set
for the router.
2. Go to
Advanced > Security > Access Control.
3. Enable
Access Control.
4. Select the access mode to either block (recommended) or
allow the device(s) in the list.
To block specific device(s)
1 ) Select
Blacklist and click Save.
I want to:
How can I
do that?