User's Manual

62
Chapter 10 Network Security
2 ) Select the device(s) to be blocked in the Devices Online
table by ticking the box.
3 ) Click
Block above the Devices Online table. The selected
devices will be added to
Devices in Blacklist automatically.
To allow specific device(s)
1 ) Select
Whitelist and click Save.
2 ) Click Add in the Devices in Whitelist section. Enter the
Device Name and MAC Address (You can copy and paste
the information from the
Devices Online list if the device
is connected to your network).
3 ) Select the checkbox to enable the entry and click OK.
Now you can block or allow specific client devices to access your
network (via wired or wireless) using the
Blacklist or Whitelist.
10. 3. IP & MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind
network device’s IP address to its MAC address. This will prevent ARP Spoofing and
Done!