User's Manual

67
Chapter 11 NAT Forwarding
4. Click View Existing Applications and select HTTP. The
External Port, Internal Port and Protocol will be automatically
filled with contents. Enter the PC’s IP address 192.168.0.100
into the
Internal IP field.
5. Click
OK.
Tips:
1. It is recommended to keep the default settings of Internal Port and Protocol
if you are not clear about which port and protocol to use.
2. If the service you want to use is not in the Service Type, you can enter the
corresponding parameters manually. You should verify the port number
that the service needs.
3. You can add multiple virtual server rules if you want to provide several
services in a router. Please note that the External Port should not be
overlapped.
Users on the internet can enter http:// WAN IP (in this example:
http:// 218.18.232.154) to visit your personal website.
Tips:
1. WAN IP should be a public IP address. For the WAN IP is assigned dynamically
by ISP, it is recommended to apply and register a domain name for the WAN
refer to Set Up a Dynamic DNS Service Account. Then users on the internet
can use http:// domain name to visit the website.
2. If you have changed the default External Port, you should use http:// WAN
IP: External Port or http:// domain name: External Port to visit the website.
Done!