User's Manual

Chapter 12

VPN Server

Note:

Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a static

IP address for router’s WAN port and synchronize your System Time with internet.

3. In the Client IP Address filed, enter the range of IP addresses (up to 10 clients) that

can be leased to the client by the PPTP VPN server.

4. Enter the

Username and Password to authenticate clients to the PPTP VPN server.

5. Click

Save.

Step 2. Configure PPTP VPN Connection on Your Remote Client

Remote client can use Windows built-in PPTP software or third-party PPTP software to

connect to PPTP Server. Here we use

Windows built-in PPTP software as an example.

1. Go to

Start > Control Panel > Network and Internet > Network and Sharing Center.

2. Select

Set up a new connection or network.