User's Manual

Chapter 13

Customize Your Network Settings

2. Go to Advanced > Network > IPTV.

3. Configure IPTV settings:

1 ) Tick the Enable IPTV check box.

2 ) Select the appropriate

Mode according to your ISP. Select

Bridge if your ISP is not listed and no other parameters

are required, and then skip to substep 4. Select

Custom if

your ISP is not listed but provides necessary parameters.

3 ) After you have selected a mode, the necessary

parameters are predetermined. You can perform other

configuration, e.g. enter the

IPTV Multicast Vlan ID and

select the

IPTV Multicast Vlan Priority in Russia mode

according to your ISP.

4 ) Select the

IGMP Proxy version, either V2 or V3, according

to the information provided by your ISP.

5 ) For Russia, Singapore-ExStream, Malaysia-Unifi and

Malaysia-Maxis modes, connect the set-top box to the

predetermined LAN port. For Bridge and Custom mode,

select the

LAN type and connect the set-top box to the

corresponding port.

6 ) Click

Save.

Your IPTV setup is done now! You may need other configurations

on your set-top box before enjoying your TV.

Tips

QoS and IPTV cannot be enabled at the same time.

13. 3. Specify DHCP Server Settings

By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and

the router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client

Done!