User's Manual

Chapter 13

Customize Your Network Settings

2. Go to Advanced > Wireless > WPS .

13. 7. 1. Set the Router’s PIN

Router’s PIN is enabled by default to allow wireless devices to connect to the router

using the PIN. You can use the default one or generate a new one.

Note:

1. If you want to enable/disable the WPS feature, go to Advanced > System Tools > System Parameters > WPS, select

or clear the Enable WPS check box, by default it is enabled.

2. PIN (Personal Identification Number) is an eight-character identification number preset to each router. WPS supported

devices can connect to your router with the PIN. The default PIN is labeled on the bottom of the router.

13. 7. 2. Use the WPS Wizard for Wi-Fi Connections

1. Select a setup method:

• Push Button(Recommended): Click the

Connect button on the screen. Within

two minutes, push the WPS button on the client device.

• PIN: Enter the client’s PIN, and click Connect.