User's Manual

Archer C3200 AC3200 Wireless Tri-Band Gigabit Router
cannot use this function. Follow the steps below to check the IP address of your
router:
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Click Basic > Network Map on the main menu, click Internet icon to check the
IP Address of the router.
3. If the IP address is a public address, you can setup remote access via FTP
server by following the steps below:
Note: The IP address is assigned by your ISP.
Setup the FTP server through Internet
1. Connect the USB disk
Connect your USB storage device to the router’s USB port directly or via a USB
cable. Wait several seconds until the USB LED becomes solid on.
2. Enable FTP(via Internet):
1) Visit http://tplinkwifi.net, then log in with the password you set for the router.
2) Select Advanced > USB Settings > Folder Sharing. Tick the box to enable
the feature, then click Save.
Note: On the page, you can get to know and the link of FTP(via Internet). If the
Access Method of FTP
is enabled, network users can access the USB disk
connected to the router with the link of FTP; if the Access Method of FTP(via
Internet) is enable, any user with Internet connection can access the USB disk
with the link of FTP(via Internet). It is not suggested that you change the Port.
3. Specify the sharing account
To specify the sharing account, choose Use Default Account or Use New
Account for the access to the USB disk. Click Save.
4. Choose the content to share and enable Authentication
- 39 -