User's Manual

Archer C3200 AC3200 Wireless Tri-Band Gigabit Router
PC as the server and its internal service port. It is recommended to assign a
static IP to the server. E.g., 192.168.0.100.
2. Visit http://tplinkwifi.net, and log in with the username and password you set
for the router.
3. Click Advanced ->NAT Forwarding -> Virtual Servers to enter the
configuration page of Virtual Servers.
4. Configure the Virtual Server rules automatically.
Select FTP in the Service Type list, the parameters will be automatically
filled in the field.
z External Port: the external port of FTP is 21.
z Internal Port: the internal port of FTP is 21.
z IP Address: enter the PC’s IP address into this field manually:
192.168.0.100.
z Protocol: the protocol used in FTP is TCP.
Tip: If you want to configure manually, please refer to “Sharing Personal
- 59 -