User's Manual

Archer C3200 AC3200 Wireless Tri-Band Gigabit Router
2. You can also appoint IP addresses within a specified range to devices of the same type by
using Condition Pool feature. For example, you can assign IP addresses within the range
(192.168.1.50 to192.168.1.80) to Camera devices, thus facilitating the network management.
Enable DHCP feature and configure the parameters according to your actual situation on
Advanced > Network > LAN Settings page.
13.1.3 Reserve LAN IP Addresses
You can view and add a reserved address for a client. When you specify an IP address for a
device on the LAN, that device will always receive the same IP address each time when it
accesses the DHCP server. If there are some devices in the LAN that require permanent IP
addresses, please configure Address Reservation on the router for the purpose.
1. Visit http://tplinkwifi.net
, and log in with the password you set for the router.
2. Go to Advanced > Network > DHCP Server.
3. Scroll down to locate the Address Reservation table and click
to add an address
reservation entry for your device.
4. Enter the MAC address of the device for which you want to reserve IP address.
5. Specify the IP address which will be reserved by the router.
6. Check to Enable this entry and click OK to make the settings effective.
- 68 -