User's Manual

Archer C5
AC1200 Wireless Dual Band Gigabit Router
- 61 -
 Allow Guest To Access My Local Network - If enabled, guests can communicate with
hosts.
 Enable Guest Network Bandwidth Control - If enabled, the Guest Network Bandwidth
Control rules will take effect.
 Egress Bandwidth For Guest Network - The upload speed through the WAN port for Guest
Network.
 Ingress Bandwidth For Guest Network - The download speed through the WAN port for
Guest Network.
 Guest Network (2.4G/5G) - Enabled or disable the Guest Network function here.
 Network Name - Enter a value of up to 32 characters. The same Name (SSID) must be
assigned to all wireless devices in your Guest Network.
 Wireless Security - You can configure the security of Guest Network here.
 Access Time - During this time the wireless stations could accessing the AP.

Note:
The range of bandwidth for Guest Network is calculated according to the setting of Bandwidth
Control on the page “Bandwidth Control->Control Settings”.
4.8.2 Storage Sharing
Choose menu “Guest Network
→
Storage Sharing”, you can configure the Guest Network
Storage Sharing on the page as shown in
Figure 4-45. When a share folder is added, you can
view its display name, volume partition, folder path and you can delete the share folder by clicking
the Delete button.
Figure 4-45 Guest Network Storage Sharing
 User Name - The user name is guest for Guest Network, which can't be changed.
 Password - Enter the password in the Password field. The password must be composed of
alphanumeric symbols not exceeding 15 characters in length.