User's Manual
Table Of Contents
- About This Guide
- Get to Know About Your Router
- Connect the Hardware
- Log into Your Router
- Set Up Internet Connections
- Guest Network
- USB Application
- Parental Control
- Bandwidth Control
- Network Security
- NAT Forwarding
- Customize Your Network Settings
- Manage the Router
- 12. 1. Set Up System Time
- 12. 2. Test the Network Connectivity
- 12. 3. Upgrade the Firmware
- 12. 4. Backup and Restore Configuration Settings
- 12. 5. Change the Administrator Account
- 12. 6. Local Management
- 12. 7. Remote Management
- 12. 8. System Log
- 12. 9. SNMP Settings
- 12. 10. Monitor the Internet Traffic Statistics
- FAQ
- Specifications
27
Chapter 5
• Allow guests to see each other
Select this checkbox if you want to allow the clients in your guest network to access
each other.
• Allow guests to access my local network
Select this checkbox if you want to allow the clients in your guest network to access
your local network, not just Internet access.
• Allow guests to access my USB storage sharing
Select this checkbox if you want to allow the clients in your guest network to access
your router’s USB storage sharing.
• Enable guest network bandwidth control
Select this checkbox if you want to assign the upstream and downstream bandwidth
for the guest network. This option is available only when Bandwidth Control is
enabled on the Advanced > Bandwidth Control page.
4. Click Save. Now users in your guest network can enjoy only the network authorities
you assigned!
Tips:
To view guest network information, go to Advanced > Status and find the Guest Network section.