User's Manual
Table Of Contents
- About This Guide
- Get to Know About Your Router
- Connect the Hardware
- Log into Your Router
- Set Up Internet Connections
- Guest Network
- USB Application
- Parental Control
- Bandwidth Control
- Network Security
- NAT Forwarding
- Customize Your Network Settings
- Manage the Router
- 12. 1. Set Up System Time
- 12. 2. Test the Network Connectivity
- 12. 3. Upgrade the Firmware
- 12. 4. Backup and Restore Configuration Settings
- 12. 5. Change the Administrator Account
- 12. 6. Local Management
- 12. 7. Remote Management
- 12. 8. System Log
- 12. 9. SNMP Settings
- 12. 10. Monitor the Internet Traffic Statistics
- FAQ
- Specifications
47
Chapter 7
4. Click the icon to set the Internet Access Time. Drag the
cursor over the appropriate cell(s) and click OK.
5. Enter a Description for the entry. Keep the Enable checkbox
selected. Click OK.
6. Select Whitelist as the restriction policy.
Tips:
1. In Blacklist mode, the controlled devices cannot access any websites containing
the specified keywords during the Internet Access Time period.
2. In Whitelist mode, the controlled devices can only access websites containing the
specified keywords during the Internet Access Time period.
7. Click . Enter a keyword or a website and
click Save.
You can add up to 32 keywords for either Blacklist or Whitelist.
Below are some sample entries to allow access.
• Enter a web address (e.g. wikipedia.org) or a web address keyword (e.g.
wikipedia) to only allow or block access to the websites containing that
keyword.
• Specify the domain suffix (eg. .edu or .org) to allow access only to the
websites with that suffix.
• If you wish to block all Internet browsing access, do not add any keyword to
the Whitelist.