User's Manual
Table Of Contents
- About This Guide
- Get to Know About Your Router
- Connect the Hardware
- Log into Your Router
- Set Up Internet Connections
- Guest Network
- USB Application
- Parental Control
- Bandwidth Control
- Network Security
- NAT Forwarding
- Customize Your Network Settings
- Manage the Router
- 12. 1. Set Up System Time
- 12. 2. Test the Network Connectivity
- 12. 3. Upgrade the Firmware
- 12. 4. Backup and Restore Configuration Settings
- 12. 5. Change the Administrator Account
- 12. 6. Local Management
- 12. 7. Remote Management
- 12. 8. System Log
- 12. 9. SNMP Settings
- 12. 10. Monitor the Internet Traffic Statistics
- FAQ
- Specifications
55
Chapter 9
Tips:
The level of protection is based on the traffic packets number. The protection will be
triggered immediately when the number of packets exceeds the preset threshold
value (the value can be set on Advanced > System Tools > System Parameters > DoS
Protection Level Settings), and the vicious host will be displayed in the Blocked DoS
Host List.
5. Select Forbid Ping Packets From LAN Port if you want to ignore the ping packets from
WAN port.
6. Select Forbid Ping Packet From LAN Port if you want to ignore the ping packets from
LAN port.
7. Click Save to make the settings effective.
9. 2. Access Control
Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed
devices (Whitelist).
Block or allow specific client devices to access my network (via
wired or wireless).
I want to: