User's Manual
Table Of Contents
- About This Guide
- Get to Know About Your Router
- Connect the Hardware
- Log into Your Router
- Set Up Internet Connections
- Guest Network
- USB Application
- Parental Control
- Bandwidth Control
- Network Security
- NAT Forwarding
- Customize Your Network Settings
- Manage the Router
- 12. 1. Set Up System Time
- 12. 2. Test the Network Connectivity
- 12. 3. Upgrade the Firmware
- 12. 4. Backup and Restore Configuration Settings
- 12. 5. Change the Administrator Account
- 12. 6. Local Management
- 12. 7. Remote Management
- 12. 8. System Log
- 12. 9. SNMP Settings
- 12. 10. Monitor the Internet Traffic Statistics
- FAQ
- Specifications
91
FAQ
Q1. What can I do if I forgot my wireless password?
The default password is labeled at the back of the router. If the password has been
altered, please connect the router to the computer using a cable and follow the steps
below:
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Basic > Wireless, locate the password on the loading page, and mark down your
new password for future use.
Q2. How to retrieve the username and password of the web management
page?
The default username and password of the web management page are admin (in lower
case). If the password has been altered, please follow the steps below:
1. Reset the router to factory default settings: While the router is powered on, press
and hold the Reset button on the back for about 8 seconds until all LEDs go on, then
release the button;
2. Visit http://tplinkwifi.net;
3. Enter admin (in lower case) as both username and password to login.
Note: You’ll need to reconfigure the router to surf the Internet once the router is reset, and please mark down your
new password for future use.
Q3. I cannot login to the router’s web management page, what can I do?
This can happen for a variety of reasons, please try the methods below and try again.
1. Make sure the router connects to the computer correctly and the corresponding LED
indicator(s) light up.
2. Make sure the IP address of your computer is configured as Obtain an IP address
automatically and Obtain DNS server address automatically.
3. Make sure the http://tplinkwifi.net you input is right.
4. Check your computer’s settings:
1 ) Go to Start > Control Panel > Network and Internet, and click View network status
and tasks;
2 ) Click Internet Options on the bottom left;
3 ) Click Connections, select Never dial a connection;