User's Manual

Table Of Contents

Chapter 4

• MTU(Bytes) - The normal MTU (Maximum Transmission Unit) value for most

Ethernet networks is 1500 Bytes. For some ISPs, you may need to modify the

MTU. But this is rarely required, and should not be done unless you are sure it is

necessary for your ISP connection.

If your ISP gives you one or two DNS IPv6 addresses, select Set IPv6 DNS Server

manually and enter the IPv6 DNS Server and Secondary IPv6 DNS Server into the

correct fields. Otherwise, the DNS servers will be assigned from ISP dynamically.

• Enable MLD Proxy - Enable the Multicast Listener Discovery (MLD) Proxy

function if you need.

• IPv6 DNS Server - Enter the DNS IPv6 address provided by your ISP.

• Secondary IPv6 DNS Server - Enter another DNS IPv6 address provided by

your ISP.

Note:

If you get Address not found error when you access a Web site, it is likely that your DNS servers are set up

improperly. You should contact your ISP to get DNS server addresses.

Static IPv6

• IPv6 Address - Enter the IPv6 address provided by your ISP.

• Prefix Length - The length of IPv6 address prefix.