User's Manual
Table Of Contents
- About This Guide
- Get to Know About You Router
- Connect the Hardware
- Log into Your Router
- Set Up Internet Connections
- Guest Network
- USB Application
- Parental Controls
- QoS (Quality of Service)
- Network Security
- NAT Forwarding
- VPN Server
- Customize Your Network Settings
- Manage the Router
- 13. 1. Set Up System Time
- 13. 2. Test the Network Connectivity
- 13. 3. Upgrade the Firmware
- 13. 4. Backup and Restore Configuration Settings
- 13. 5. Change the Administrator Account
- 13. 6. Password Recovery
- 13. 7. Local Management
- 13. 8. Remote Management
- 13. 9. System Log
- 13. 10. Monitor the Internet Traffic Statistics
- 13. 11. Control LEDs
- FAQ
- Specifications
7
Chapter 1
Get to Know About You Router
The following parts (view from left to right) are located on the rear panel.
Item Description
Reset Button
Press this button for about 7 seconds to reset the router.
USB 2.0 Port Connect your USB 2.0 storage device or USB 2.0 printer to this port.
Internet Port This port is where you’ll connect to the DSL/Cable modem, or Ethernet.
Ethernet Ports (1/2/3/4) Connect your Etherent devices, like PCs, to these ports.
USB 3.0 Port Connect your USB 3.0 storage device or USB 3.0 printer to this port.
Power On/Off Button Press this button to power on or off the router.
Power Port
This port is where you will connect the power socket via the provided power
adapter.