User's Manual
Table Of Contents
- About This Guide
- Get to Know About You Router
- Connect the Hardware
- Log into Your Router
- Set Up Internet Connections
- Guest Network
- USB Application
- Parental Controls
- QoS (Quality of Service)
- Network Security
- NAT Forwarding
- VPN Server
- Customize Your Network Settings
- Manage the Router
- 13. 1. Set Up System Time
- 13. 2. Test the Network Connectivity
- 13. 3. Upgrade the Firmware
- 13. 4. Backup and Restore Configuration Settings
- 13. 5. Change the Administrator Account
- 13. 6. Password Recovery
- 13. 7. Local Management
- 13. 8. Remote Management
- 13. 9. System Log
- 13. 10. Monitor the Internet Traffic Statistics
- 13. 11. Control LEDs
- FAQ
- Specifications
112
Windows computer?
Because of Windows special credential mechanism, if the USB access username you set
is the same as the Windows account name, Windows will be unable to remember the
password you set for the USB.
To solve this problem, you can set a different USB access username or make the USB
access password the same as your Windows account. After you modify the access
account, remember to log off (sigh out) from the Windows.
Q9. Why am I never required to enter the account information for USB
access even though I have enabled the Authentication feature?
This situation probably happens on your Windows computer due to its special
credential mechanism. If your USB access username and password are both the same
as your Windows account, the Windows will automatically use its account information
to access the USB disk. Therefore, you will have no need to enter the username and
password.