User's Manual
Table Of Contents
- About This Guide
- Get to Know About Your Router
- Connect the Hardware
- Log In to Your Router
- Set Up Internet Connection
- TP-Link Cloud Service
- Guest Network
- USB Settings
- Parental Controls
- QoS
- Network Security
- NAT Forwarding
- Customize Your Network Settings
- VPN Server
- Manage the Router
- 14. 1. Set Up System Time
- 14. 2. Test the Network Connectivity
- 14. 3. Upgrade the Firmware
- 14. 4. Backup and Restore Configuration Settings
- 14. 5. Change the Login Password
- 14. 6. Password Recovery
- 14. 7. Local Management
- 14. 8. Remote Management
- 14. 9. System Log
- 14. 10. Monitor the Internet Traffic Statistics
- FAQ
4
Chapter 1
Get to Know About Your Router
LED Explanation
Name Status Indication
Pulsing
orange
The system is starting up
Solid white
on
The router is working normally.
Red No internet connection or Wi-Fi is off.
Pulsing
white
The firmware is being upgraded or WPS connection is being
established. Do not disconnect or power off your router.
Off Power is off.
Button Description
Name Description
(WPS Button)
Press this WPS button, and immediately press the WPS button on your client
device. The
LED of the router should change from pulsing white to solid on,
indicating successful WPS connection.
(Wi-Fi Button)
Press and hold this Wi-Fi button for about 2 seconds to turn on or off the wireless
function of your router.
(LED Button)
Press and hold the LED button for about 1 second to turn on or off the LEDs of
your router.
1. 2. 2. The Side and Back Panel