User Manual

Table Of Contents
33
Chapter 4
Note:
Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or
assign a static IP address for router’s WAN port and synchronize your System Time with Internet.
3. In the Client IP Address filed, enter the range of IP addresses (up to 10) that can be
leased to the devices by the PPTP VPN server.
4. Click Advanced to set the PPTP connection permission according to your needs.
Select Allow Samba (Network Place) access to allow your VPN device to access
your local Samba server.
Select Allow NetBIOS passthrough to allow your VPN device to access your Samba
server using NetBIOS name.
Select Allow Unencrypted connections to allow unencrypted connections to your
VPN server.
5. Click Save.
6. Configure the PPTP VPN connection account for the remote device, you can create
up to 16 accounts.
1 ) Click Add.
2 ) Enter the Username and Password to authenticate devices to the PPTP VPN
Server.