User Manual

38
Chapter 4
If you have set the Virtual Server, DMZ or DHCP address reservation, and the new LAN IP address is not in
the same subnet with the old one, then you should reconfigure these features.
Set Up Link Aggregation
The Link Aggregation feature combines two ports together to make a single high-
bandwidth data path, thus sustaining a higher-speed and more stable wired network.
1. Visit http://tplinkwifi.net, and log in with password you set for the router.
2. Go to Advanced > Network > LAN.
3. Enable Link Aggregation.
4. Select LACP active or LACP passive for Mode.
• LACP active: enables LACP (Link Aggregation Control Protocol) unconditionally.
• LACP passive: enables LACP only when an LACP device is detected.
5. Specify two ports for link aggregation.
6. Click Save.
Configure to Support IPTV Service
Configure IPTV setup to enable Internet/IPTV/Phone service
provided by my Internet Service Provider (ISP).
1. Visit http://tplinkwifi.net, and log in with password you set for
the router.
2. Go to Advanced > Network > IPTV.
3. If your ISP provides the networking service based on IGMP
technology, e.g., British Telecom(BT) and Talk Talk in UK:
I want to:
How can
I do that?