User Manual
Table Of Contents
- About This Guide
- Get to Know About Your Router
- Connect to the Internet
- Log In
- Configure the Router in Router Mode
- Configure the Router in Access Point Mode
- Configure the Router in Range Extender Mode
- FAQ
73
Chapter 5
2. Select the Start and End date and time of the daylight saving time at your local time
zone.
3. Click Save.
Control LEDs
The LEDs of the extender indicate its activities and status. You can enable the Night
Mode feature to specify a time period during which the LEDs are off.
1. Visit http://tplinkwifi.net, and log in with the password you set for the extender.
2. Go to Settings > System Tools > LED Control.
¾ To specify a time period when LEDs are off:
1. Select Night Mode.
2. Specify a time period in the LED Off Time field, and the LEDs will be off during this
period.
3. Click Save.
Power Schedule
The Power Schdule feature allows you to specify a time period during which the
extender is off.
1. Visit http://tplinkwifi.net, and log in with the password you set for the extender.
2. Go to Settings > Advanced Settings > Power Schedule.
¾ To specify a time period when the extender is off: