User Manual

4
Chap
ter 1
1. 2. 1. LE
D Explanation
Name S
tatus Indication
WA
N
Blue On
The int
ernet is available.
Or
ange On
The r
outer’s WAN port is connected, but the internet is not available.
Off
The r
outer’s WAN port is not connected.
PW
R
On
S
ystem initialization completes.
Blinking
S
ystem initialization or firmware upgrade is in progress. Do not
disconnect or power off the router.
Off
P
ower is off.
2.4G/5G
On
The c
orresponding wireless function (2.4G/5G) is working properly.
Off
The c
orresponding wireless function (2.4G/5G) is disabled.
RE
Blinking
The
router is connecting to the host network. This process will last in
the first 2 minutes.
On
The r
outer has been successfully connected to the host network, and
it is working in Range Extender mode.
The Back P
anel
PW
R
The f
ollowing parts (view from left to right) are located on the rear panel.
I
tem Description
P
WR Port For connecting the router to a power socket via the provided power adapter.
Power On/Off For powering on or off the router.
Wi-Fi On/Off Press and hold this button about 2 seconds to enable or disable Wireless function.
Reset Button
Use a pin to press and hold this button until all the LED turn on momentarily to reset
the router to its factory default settings.
WAN Port For connecting to a DSL/Cable modem, or an Ethernet port.