User's Manual

Archer C7
AC1750 Wireless Dual Band Gigabit Router
- 4 -
1.4 Panel Layout
1.4.1 The Front Panel
Figure 1-1 LEDs on the front panel
The router’s LEDs are located on the front panel (View from left to right).
Name Status Indication
(Power)
Off Power is off.
On
Power is on.
(System)
On
The router is initializing or maybe has a system error.
Flashing
The router is working properly.
Off
The router has a system error.
(Wireless
2.4GHz)
Off
The wireless function is disabled.
Flashing
The wireless function is enabled. The router is working on
2.4GHz radio band.
(Wireless
5GHz)
Off
The wireless function is disabled.
Flashing
The wireless function is enabled. The router is working on
5GHz radio band.
(Ethernet)
(Internet)
Off
There is no device linked to the corresponding port.
On
There is a device linked to the corresponding port but there
is no activity.
Flashing There is an active device linked to the corresponding port.
(WPS)
Slow
Flashing
A wireless device is connecting to the network by WPS
function. This process will last in the first 2 minutes.
On
A wireless device has been successfully added to the
network by WPS function.
Quick
Flashing
A wireless device failed to be added to the network by WPS
function.
(USB on
the rear panel)
Off No storage device or printer is plugged into the USB port.
On
A storage device or printer has connected to the USB port.
Table 1-1 The LEDs Description