User's Manual

Archer C7
AC1750 Wireless Dual Band Gigabit Router
- 19 -
 Wireless Network Name - Enter a string of up to 32 characters. The same Name
(SSID) must be assigned to all wireless devices in your network. The default SSID is set
to be TP-LINK_xxxx_5G (xxxx indicates the last unique four characters of each
Router's MAC address), which can ensure your wireless network security. But it is
recommended strongly that you change your networks name (SSID) to a different value.
This value is case-sensitive. For example, MYSSID is NOT the same as MySsid.
 Wireless Security
 Disable Security - The wireless security function can be enabled or disabled. If
disabled, the wireless stations will be able to connect the router without encryption.
 Enable Security (WPA-PSK/WPA2-PSK) - It’s selected by default, with the default
PSK password the same as the default PIN code.
 No Change - If you chose this option, wireless security configuration will not
change!
The above settings are only for basic wireless parameters. For advanced settings, please
check “More Advanced Wireless Settings”, and then you can set the following parameters.
 Band - This field displayed the operating frequency being configured.
 Mode - This field determines the wireless mode which the router works on.
 11an mixed - Select if you are using both 802.11a and 802.11n wireless clients.
 11a/n/ac mixed – Select if you are using 802.11a, 802.11n and 802.11ac wireless
clients.
 Channel - This field determines which operating frequency will be used. It is not
necessary to change the wireless channel unless you notice interference problems with
another nearby access point. If you select “Auto”, then the AP will select the best
channel automatically.
8. Click the Finish button to complete the Quick Setup.