User's Manual
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the router
- Chapter 3. Quick Setup
- Chapter 4. Basic
- Chapter 5. Advanced
- 5.1 Status
- 5.2 Network
- 5.3 Dual Band Selection
- 5.4 Wireless 2.4GHz
- 5.5 Wireless 5GHz
- 5.6 Guest Network
- 5.7 DHCP
- 5.8 USB Settings
- 5.9 NAT Boost
- 5.10 Forwarding
- 5.11 Security
- 5.12 Parental Control
- 5.13 Access Control
- 5.14 Advanced Routing
- 5.15 Bandwidth Control
- 5.16 IP & MAC Binding
- 5.17 Dynamic DNS
- 5.18 IPv6 Support
- 5.19 System Tools
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
- Appendix D: Glossary
Archer C8
AC1750 Wireless Dual Band Gigabit Router
- 11 -
Figure 3-5 WAN Connection Type
Static IP
Figure 3-6 WAN Connection Type
IP Address - Enter the IP address into this field.
Subnet Mask - Enter the subnet mask into this field. It is usually 255.255.255.0.
Default Gateway - Enter the gateway IP address into this field.
Primary DNS - Enter the DNS Server IP address into this field.
Secondary DNS (Optional) - If your ISP provides another DNS server IP address, enter it
into this field.