User's Manual
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the router
- Chapter 3. Quick Setup
- Chapter 4. Basic
- Chapter 5. Advanced
- 5.1 Status
- 5.2 Network
- 5.3 Dual Band Selection
- 5.4 Wireless 2.4GHz
- 5.5 Wireless 5GHz
- 5.6 Guest Network
- 5.7 DHCP
- 5.8 USB Settings
- 5.9 NAT Boost
- 5.10 Forwarding
- 5.11 Security
- 5.12 Parental Control
- 5.13 Access Control
- 5.14 Advanced Routing
- 5.15 Bandwidth Control
- 5.16 IP & MAC Binding
- 5.17 Dynamic DNS
- 5.18 IPv6 Support
- 5.19 System Tools
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
- Appendix D: Glossary
Archer C9
AC1900 Wireless Dual Band Gigabit Router
Figure 5-100 PPPoEv6 – DHCPv6 Server
User Name/Password - Enter the User Name and Password provided by your ISP. These
fields are case-sensitive.
Get IPv6 Address Way
• Get non-temporary IPv6 address - Get a non-temporary IPv6 address by DHCPv6
from the ISP.
• Get IPv6 prefix delegation - Get a prefix delegation IPv6 address by DHCPv6 from the
ISP, and the clients in LAN create IPv6 address with the delegation.
• Use IP address specified by ISP - Input a static IPv6 address from the ISP
Click the Connect button to connect immediately.
Click the Disconnect button to disconnect immediately.
IPv6 Address Assign Type - There are two types of assignation for IPv6 address: SLAAC
(Stateless address auto-configuration) and DHCPv6 (Dynamic Host Configuration Protocol
for IPv6) Server.
SLAAC
• IPv6 Address Prefix -The Prefix of IPv6 Address
DHCPv6 Server
• IPv6 Address Prefix -The Prefix of IPv6 Address
• Release Time - the length of time a network user will be allowed to keep connecting to the
router with the current DHCPv6 Address. Enter the amount of time (in seconds) that the
- 108 -