User's Manual
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the router
- Chapter 3. Quick Setup
- Chapter 4. Basic
- Chapter 5. Advanced
- 5.1 Status
- 5.2 Network
- 5.3 Dual Band Selection
- 5.4 Wireless 2.4GHz
- 5.5 Wireless 5GHz
- 5.6 Guest Network
- 5.7 DHCP
- 5.8 USB Settings
- 5.9 NAT Boost
- 5.10 Forwarding
- 5.11 Security
- 5.12 Parental Control
- 5.13 Access Control
- 5.14 Advanced Routing
- 5.15 Bandwidth Control
- 5.16 IP & MAC Binding
- 5.17 Dynamic DNS
- 5.18 IPv6 Support
- 5.19 System Tools
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
- Appendix D: Glossary
Archer C9
AC1900 Wireless Dual Band Gigabit Router
802.1Q Tag VLAN - ISP would provide the networking service based on 802.1Q Tag
VLAN technology. You can assign different VLAN Tag ID for different LAN ports, to
connect PC, IPTV set-top-box or IP-phone. Please contact with you ISP to get the VLAN
ID information.
5.3 Dual Band Selection
Choose menu “Advanced
→
Dual Band Selection”, and you can choose the working frequency
for your router. It is recommended that your computers and devices running video and voice
applications use the 5GHz band, while your guest access and computers that are only browsing
the web use the 2.4GHz band.
Figure 5-11 Dual Band Selection
5.4 Wireless 2.4GHz
Figure 5-12 Wireless menu
There are six submenus under the Wireless menu, shown in Figure 5-12: Wireless Settings,
WPS, Wireless Security, Wireless MAC Filtering, Wireless Advanced and Wireless
Statistics. Click any of them, and you will be able to configure the corresponding functions.
5.4.1 Wireless Settings
Choose menu “Advanced
→
Wireless 2.4GHz
→
Wireless Settings”, you can configure the basic
settings for the wireless network of 2.4GHz on this page.
- 36 -