User's Manual
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the router
- Chapter 3. Quick Setup
- Chapter 4. Basic
- Chapter 5. Advanced
- 5.1 Status
- 5.2 Network
- 5.3 Dual Band Selection
- 5.4 Wireless 2.4GHz
- 5.5 Wireless 5GHz
- 5.6 Guest Network
- 5.7 DHCP
- 5.8 USB Settings
- 5.9 NAT Boost
- 5.10 Forwarding
- 5.11 Security
- 5.12 Parental Control
- 5.13 Access Control
- 5.14 Advanced Routing
- 5.15 Bandwidth Control
- 5.16 IP & MAC Binding
- 5.17 Dynamic DNS
- 5.18 IPv6 Support
- 5.19 System Tools
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
- Appendix D: Glossary
Archer C9 AC1900 Wireless Dual Band Gigabit Router
- 10 -
Default Gateway - Enter the gateway IP address into this field.
Primary DNS - Enter the DNS Server IP address into this field.
Secondary DNS (Optional) - If your ISP provides another DNS server IP address, enter it
into this field.
PPPoE/Russian PPPoE
Figure 3-7 WAN Connection Type
Username - Enter the username provided by your ISP. This field is case-sensitive.
Password - Enter the password provided by your ISP. This field is case-sensitive.
L2TP
Figure 3-8 WAN Connection Type
VPN Server IP/ Domain Name - Enter the server IP address/name provided by your ISP.
Username - Enter the username provided by your ISP. This field is case-sensitive.
Password - Enter the Password provided by your ISP. This field is case-sensitive.
Dynamic IP/Static IP - Select Static IP if the IP Address, Subnet Mask, Default Gateway, and
Primary DNS server address have been provided by your ISP. Otherwise, please select
Dynamic IP.
IP Address - Enter the IP address provided by your ISP.
Subnet Mask - Enter the subnet mask provided by your ISP.
Default Gateway- Enter the default gateway provided by your ISP.
Primary DNS - Enter the primary DNS provided by your ISP.