User's Manual

Archer C9 AC1900 Wireless Dual Band Gigabit Router
- 16 -
 Dynamic IP/ Static IP - Choose either as you are given by your ISP and enter the ISP’s IP
address or the domain name. If you choose static IP and enter the domain name, you should
also enter the DNS assigned by your ISP. And click the Save button. Click the Connect
button to connect immediately. Click the Disconnect button to disconnect immediately.
Click the Save button to save your settings.

Note:
If you don't know how to choose the appropriate connection type, click the Detect button to allow
the router to automatically search your Internet connection for servers and protocols. The
connection type will be reported when an active Internet service is successfully detected by the
router. This report is for your reference only. To make sure the connection type your ISP provides,
please refer to the ISP. The various types of Internet connections that the router can detect are as
follows:
 PPPoE - Connections which use PPPoE that requires a user name and password.
 Dynamic IP - Connections which use dynamic IP address assignment.
 Static IP - Connections which use static IP address assignment.
The router cannot detect PPTP and L2TP connections with your ISP. If your ISP uses one of
these protocols, then you must configure your connection manually.
4.3 Wireless
Choosing menu “Basic→Wireless”, you can configure the basic settings for the wireless network
including 2.4GHz and 5GHz.
Figure 4-8 Wireless Setting
 Wireless 2.4GHz/5GHz - Select ON to enable your wireless 2.4GHz/5GHz network, and
select OFF to disable your wireless 2.4GHz/5GHz network.
 Network Name (SSID) - Create a name (up to 32 characters) for your wireless 2.4GHz/5GHz
network. If the Hide SSID checkbox is selected, the SSID of your wireless network will be
hidden from the Wi-Fi network.
 Password - Create a password for your wireless network. The password must have a
minimum of 8 characters in length.
Click the Save button to save your settings.